strugling with conicals

With the Thor bulletts, do you run a patch down the barrell between shots?

Not with BH 209. I've taken 50 shots without swabbing, and never lost accuracy. It also never got harder to load at 50 shots.

Getting closerAttachment 3932Attachment 3933

So far my best is a 2" group at 65 grains and I tried this without swabbing and I want to try 75 grains again because the group was about the same, 2" but that was with swabbing so want to try with dirty bore. the thors go down a clean barrel hard so I didn't think that it could be done with a dirty one but in fact it may be easier. hopefully I will get dialed next weekend. Also I had adjusted my spacing so the primmer is tight so I have no fouling around my primers or breach I definitely like being able to do this with the cva muzzys. Here's some pics if I did it right.

That's certainly a kill. You might also try some JB Paste to smooth out the bore. 20-30 strokes should be enough. It might help it load a bit easier too.

Don't be offended, but is the group size partly you?

No offense taken, I started second guessing my scope and my self.

Its possible but I shoot my rifles well with A scope free hand and on the bench. With that sad I have a 20 gauge bolt slug gun that shoots 1" group but to do that I have to pull down on the for-end a bit to manage the type of recoil (lift). I have been doing the same thing with the muzzle loader, maybe I should let the for-end free like a rifle on the bench. Im using a zero kick rest. There was a slight breeze to consider. I have all day sunday.

So 2 inch group with a peep and 300 grain thor .500 the .501 may be just to tight. Then I find out that thor 300 grain are out of stock. Hope the 250 in .500 will group as well I have only shot them in the .501. time is getting tight, but I will get it in time.
He may have just enough for me.
Thanks for all the help.

The final tally is good news the 250 grain thors are a go, and terry has plenty of supply in the 250,s. If I had only tryd them in the .500 first rather than in .501. I would have saved some stress and $$ But regardless I am happy. Final just over a one inch group at a 100 yards with a peep.:o

That will work.