Results 1 to 7 of 7

Thread: Reloading

Hybrid View

  1. #1
    Member
    Join Date
    Feb 2012
    Location
    Moscow, ID
    Posts
    60
    Thanks
    0
    Thanked 3 Times in 3 Posts
    Congratulations
    0
    Congratulated 0 Times in 0 Posts

    Reloading

    Hi everyone,

    I was wondering if anyone knew what I would need to neck down a .30-06 shell to a .25-06? I put my 30-06 down and bought a 25-06 and decided to start reloading. I am learning the basics but would like to use my old brass from my other gun. Any advice would be great and if you have any advice on parts that need to be bought suggestions would also be great.

    thanks and good luck with draws and seasons that have started
    Joe Buttice
    Twisted Addiction
    Oregon State University
    Forest Management
    Bennett Lumber Products Inc.
    Lumber Salesman

  2. #2
    Banned
    Join Date
    Mar 2012
    Location
    North of 60!
    Posts
    598
    Thanks
    21
    Thanked 15 Times in 14 Posts
    Congratulations
    0
    Congratulated 0 Times in 0 Posts
    My friend that is a horrible idea.

    Not only is the base of the 30-06 shell not getting sized when you introduce it to it's own 30-06 sizing die, but you will have to do some serious neck turning after you do manage to get them resized.

    Others might dissagree, but brass is cheap. Buy 100 25-06 cases from Midwayusa for $50.

  3. #3
    Senior Member
    Join Date
    Jun 2011
    Location
    Dolores, Colorado
    Posts
    2,512
    Thanks
    120
    Thanked 392 Times in 298 Posts
    Congratulations
    7
    Congratulated 1 Time in 1 Post
    Quote Originally Posted by Edelweiss View Post
    My friend that is a horrible idea.

    Not only is the base of the 30-06 shell not getting sized when you introduce it to it's own 30-06 sizing die, but you will have to do some serious neck turning after you do manage to get them resized.

    Others might dissagree, but brass is cheap. Buy 100 25-06 cases from Midwayusa for $50.

    Yes I disagree. I built a 25-o6 when it was a wildcat and brass wasn't made. All you have to do is run the 30-06 brass thru a F/L 25-06 sizing die and check OAL. If it is too long, trim it. Pretty simple! Once the case has been formed and shot, neck size only from then on. I'ves formed thousands of pieces of brass this way. (30-06 to 25-05, 250 Savage to 22-250, 243 to 22-250)
    Colorado Cowboy
    Cowboy Action Shooter; Endowment Life Member-NRA
    The Original Rocket Scientist-Retired
    "My Father always considered a walk in the mountains as the equivalent of church going."
    Aldous Huxley

  4. #4
    Senior Member
    Join Date
    May 2011
    Location
    Reno, Nevada, United States
    Posts
    2,101
    Thanks
    55
    Thanked 151 Times in 115 Posts
    Congratulations
    0
    Congratulated 3 Times in 2 Posts
    Cc, you know you just dated yourself! 25-06 rem was first produced in 1969! I know you get this alot but that was way before I was born! Same with 22-250! 1965 ish right!

    Anyways, you can do what cc suggested but I think the smarter thing would be to buy new brass. Not only is it new brass but someone that might have a 30-06 might mistake your brass for theirs or loaded ammo for theirs and try shoot it because of the head stamp. I know it's extremely unlikely but possible and outcome probably wouldn't be that bad. Or you could accidentally grab 30-06 load and get a bullet stuck.



    You will love the 25! My old man has been shooting one since… well around 1969! Not to date him or anything! He is rebarrelling his original for a .257 weatherby though, he says he doesn't need two 25s.

  5. #5
    Senior Member
    Join Date
    Apr 2011
    Location
    Montana
    Posts
    2,168
    Thanks
    56
    Thanked 309 Times in 237 Posts
    Congratulations
    2
    Congratulated 0 Times in 0 Posts
    I also recommend getting new brass. As Dr.H pointed out, I think it is always a good idea to have correctly headstamped cartridges. However, the bases of the two cartidges are the same dimensions, so running them through the 25-06 die and trimming would work, as CC suggested. As Edelweiss noted, however, you will end up with a bunch of neck turning, if you want top accuracy.

    So ... I guess I agree with everybody.

  6. #6
    Senior Member
    Join Date
    Aug 2011
    Location
    Loma Rica, Ca.
    Posts
    711
    Thanks
    23
    Thanked 56 Times in 49 Posts
    Congratulations
    1
    Congratulated 0 Times in 0 Posts
    Yep, all good advice........Buy new 25-06 brass, full length size all of them, run them all through the case trimmer and trim to the minimum COL length listed.......now you have a good foundation for load development, remember safety and consistancy are key elements of reloading, good luck.

  7. #7
    Member
    Join Date
    Feb 2012
    Location
    Moscow, ID
    Posts
    60
    Thanks
    0
    Thanked 3 Times in 3 Posts
    Congratulations
    0
    Congratulated 0 Times in 0 Posts
    Thanks guys I was thinking of just getting new brass too. But I thought I would ask and see what more experienced re-loaders thought. Thank you for all the information.
    Joe Buttice
    Twisted Addiction
    Oregon State University
    Forest Management
    Bennett Lumber Products Inc.
    Lumber Salesman

 

 

Similar Threads

  1. Reloading equipment
    By Work2hunt in forum Guns, Muzzleloaders and Ammo
    Replies: 33
    Last Post: 02-07-2014, 09:57 AM
  2. Reloading Question
    By LaHunter in forum Guns, Muzzleloaders and Ammo
    Replies: 20
    Last Post: 01-27-2014, 05:40 PM
  3. Reloading, reloading and more reloading!!!
    By Colorado Cowboy in forum Guns, Muzzleloaders and Ammo
    Replies: 6
    Last Post: 04-08-2013, 01:46 PM
  4. .25-06 reloading
    By ICEMAN3 in forum Guns, Muzzleloaders and Ammo
    Replies: 28
    Last Post: 08-09-2012, 04:52 PM
  5. Reloading question
    By Jerry in forum Guns, Muzzleloaders and Ammo
    Replies: 4
    Last Post: 09-15-2011, 09:03 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •