Which one...Shuttle T Lock or G5 Montec

[Umpqua Hunter]

We have to shoot fixed blade broad heads in Oregon. I want to go with the Shuttle T-Lock (100 grain) or the G5 Montecs (100 grain). For both deer and elk, which of these two broad heads would you recommend?

[Drhorsepower]

I hear great things about the g5, maybe buy a pack of each and shoot em and see if you can tell a difference in them as far as accuracy although you might have to tune your bow and also maybe depth in target.

My go to fixed blade is the thunderhead 100gr. Just because I have a buttload of em.

[BOHNTR]

Between those two......the Shuttle T's. Much stronger head, IMO.

[Doe Nob]

I have shot shuttle T's for years, they fly really well, I think there may be other fixed blades that beat them in penetration tests, but to me if you put it in the right spot, the job will get done.

[Darktimber]

The blade angle on the shuttle-t is way to steep. On dense bone (ie the shoulder blade) the steep angle causes them to put on the brakes and lock up. A more gradual angle like the montec has a much better chance at passing through dense bone. Remember, all broadheads will perform on the perfect shot, its the superior heads that will shine on the marginal shot to.

[justinthedoc]

Shuttle for sure, G5's are good, I like how the shuttles fly, seem to steer a little less with the design, and no broadhead is punching threw a mature elks shoulder blade.

[Darktimber]

Shuttle for sure, G5's are good, I like how the shuttles fly, seem to steer a little less with the design, and no broadhead is punching threw a mature elks shoulder blade.

I have seen a G5 striker do it and a Ramcat do it. The G5 punched through the blade at 25 yards and broke an opposing rib. Bull went 75 yards. The Ramcat was a quartering away shot at 40 yards. Went in by the last rib and exited the opposite shoulder blade for a complete pass through. Bull went 50 yards.

Used the shuttle-t's one year and put a forward shot on one @ 12 yards. That head acted like it hit a brick wall. This was towards the back of the bulls shoulder to, not the thick stuff. After that, me and my brother tested the shuttle on various dense objects. Epic fail. The blades are to steep for dense bone. So yes, a good head will punch a shoulder blade, and others will not.

[Darrin Stark]

I shoot the G5 Strikers last year was my first year using them and i really like them i shot a spike and the arrow went all the way through and the elk ran only thirty yards and dropped. But use whatever you are comfortable with.

[Umpqua Hunter]

DR: I've also shot Thunderhead 100s for as long as I can remember, and have a bunch of parts too, but I am finally thinking of making a change.

Everyone: I like the simple one piece design of the G5s and the simplicity to resharpen, but I have heard many complaints on how sharp these heads can get, particularly on the stainless head. I'm guessing that also has a lot to do with the steep angle the blade is sharpened at.

I have heard excellent reviews on the Shuttle T-Lock, especially with the new sharper blades, and am leaning that way.

I'm looking for a fixed blade broad head that is say in the top 10% for aerodynamics, and say in the top 30% for penetration. I definitely lean to a forgiving broad head to set-up and shoot. Is there another obvious option I should be considering?

[Joe Hulburt]

I'm looking for a fixed blade broad head that is say in the top 10% for aerodynamics, and say in the top 30% for penetration. I definitely lean to a forgiving broad head to set-up and shoot. Is there another obvious option I should be considering?

I would consider 4 blade Slick Trick Magnums in 100 grain over either of the two choices since you asked. They fly as well as the Shuttle T's but leave a bigger hole and better blood trail IMO. A little less money too....

Whatever you go with, pick a spot and best of luck to you. It's getting close!