Page 1 of 3 123 LastLast
Results 1 to 10 of 24

Thread: Bullet Question

  1. #1
    Senior Member
    Join Date
    Jul 2013
    Posts
    110
    Thanks
    0
    Thanked 2 Times in 2 Posts

    Bullet Question

    Well I just picked up my elk gun and now need some bullet advice. If I had needed to use my .270, I was going to use 150 gr nosler partition or an all copper bullet. Now that I have a 300 WSM, should I go with the same bullets in the 180 gr variety or is there a better choice. What do you guys use and what do you thinks the best choice for a 300? Thanks.


    Sent from my iPad using Tapatalk HD

  2. #2
    Senior Member
    Join Date
    Jul 2013
    Location
    loretto ky
    Posts
    104
    Thanks
    0
    Thanked 5 Times in 5 Posts
    168 gr barnes ttsx thats what I load in my 300 rum an thats what I'll be shooting next month on my third elk hunting trip havent got to see what this bullet does on elk but it rocks deer

  3. #3
    Senior Member
    Join Date
    Jul 2013
    Posts
    110
    Thanks
    0
    Thanked 2 Times in 2 Posts
    Roger that KY. Good luck on your hunt! Let me know how the bullet does if you're successful.


    Sent from my iPad using Tapatalk HD

  4. #4
    Senior Member
    Join Date
    Jul 2013
    Location
    loretto ky
    Posts
    104
    Thanks
    0
    Thanked 5 Times in 5 Posts
    Quote Originally Posted by Ltsheets View Post
    Roger that KY. Good luck on your hunt! Let me know how the bullet does if you're successful.


    Sent from my iPad using Tapatalk HD
    Hope so have a Huskemaw on it an it works hitting steel at 1000yd

  5. #5
    Senior Member
    Join Date
    Jul 2013
    Posts
    110
    Thanks
    0
    Thanked 2 Times in 2 Posts
    Wow. I'm glass shopping as we speak. Leaning towards a Meopta Meopro 4-12x50.


    Sent from my iPad using Tapatalk HD

  6. #6
    Senior Member
    Join Date
    Dec 2011
    Location
    Bitteroots
    Posts
    333
    Thanks
    9
    Thanked 26 Times in 19 Posts
    180 grain Accubonds. Havent let me down.

  7. #7
    Senior Member
    Join Date
    Dec 2011
    Location
    Missouri Ozarks
    Posts
    244
    Thanks
    3
    Thanked 14 Times in 14 Posts
    Nosler Partition is never a bad choice in my experience.

    Bob

  8. #8
    Senior Member
    Join Date
    Jul 2013
    Posts
    110
    Thanks
    0
    Thanked 2 Times in 2 Posts
    Thanks bob. That's what I'm leaning towards.


    Sent from my iPad using Tapatalk HD

  9. #9
    Senior Member
    Join Date
    Mar 2011
    Location
    midwest
    Posts
    288
    Thanks
    91
    Thanked 18 Times in 15 Posts
    +1 on the accubond. The performance in my experience mimics the partition closely, but with the added BC advantage. If I was working up loads I'd try the new long range accubond if anyone has them in stock. I just picked up a custom 270 I had made as a mountain rifle and plan to try the 150's ASAP, see if I can find a load for my upcoming elk hunt. Extra ballistic coefficient and sectional density never hurt.

    The partition sometimes penetrates better because it sheds more of the front of the bullet. Every accubond I've recovered looks like it came out of an add for what a bullet should do. They might not penetrate as much at times though because the mushroom stays intact and therefore has more frontal area to shove through an animal. Most of the time the partitions I've seen stay together also though and performance is similar. I have shot a lot more accubonds than partitions, and most of both have exited so my sample size isn't huge. I sure have no complaints with either.

  10. #10
    Senior Member
    Join Date
    Jun 2011
    Location
    Dolores, Colorado
    Posts
    1,992
    Thanks
    73
    Thanked 221 Times in 174 Posts
    Lots of new bullets on the market today....getting them a different story!

    Its really hard for me to appreciate the work that the bullet mfgrs do in developing new stuff. I have been shooting Nosler Partition bullets for many, many years. I have worked hard to develop loads that shoot less than moa for this bullet. The 180 grainers in my .300 Wby are absolute tack drivers and the performance in expansion in game animals would be hard to beat. I probably have enough bullets in my inventory to last me the rest of my life. Same goes for 30-06, 25-06 and my other big game rifles.(just got a .375 H & H in a Ruger #1 so thats a different story). I'll stick to what works for me and my huntig needs.

    If Colorado, Wyoming and any other of the western states I hunt in ever ban lead bullets like California, then all bets are off!
    Colorado Cowboy
    Cowboy Action Shooter; Endowment Life Member-NRA
    The Original Rocket Scientist-Retired
    "My Father always considered a walk in the mountains as the equivalent of church going."
    Aldous Huxley

 

 

Similar Threads

  1. What do you look for in a bullet?
    By Drhorsepower in forum Guns, Muzzleloaders and Ammo
    Replies: 28
    Last Post: 05-01-2013, 06:34 PM
  2. 7mm coyote bullet
    By Squirrel tail in forum Guns, Muzzleloaders and Ammo
    Replies: 4
    Last Post: 11-02-2012, 09:16 PM
  3. Antelope Hunting Bullet Question
    By gtbc82 in forum Guns, Muzzleloaders and Ammo
    Replies: 6
    Last Post: 10-21-2012, 03:11 AM
  4. good 270 elk bullet
    By Jon Boy in forum Guns, Muzzleloaders and Ammo
    Replies: 49
    Last Post: 02-17-2012, 11:13 AM
  5. Bullet for antelope
    By iowashedhunter in forum Guns, Muzzleloaders and Ammo
    Replies: 13
    Last Post: 11-02-2011, 10:43 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •