Page 2 of 6 FirstFirst 1234 ... LastLast
Results 11 to 20 of 51

Thread: DIY Euro Mount!

  1. #11
    Senior Member
    Join Date
    Jun 2014
    Location
    San Tan Valley, AZ
    Posts
    123
    Thanks
    141
    Thanked 43 Times in 28 Posts
    Congratulations
    40
    Congratulated 2 Times in 2 Posts
    Scott-great video! I do have one question though. At about 2 mins and 33 sec into the video there is a shot of the head in the pot boiling and the rim of the pot is lined with aluminum foil but I don't see it in any other segments.

    Is this to protect the horns from the direct heat or protect your pot from the nastiness? At what point do you add the foil or is it even that important?

    Thanks again.

  2. #12
    Senior Member
    Join Date
    Aug 2011
    Location
    Littleton, CO
    Posts
    185
    Thanks
    115
    Thanked 59 Times in 43 Posts
    Congratulations
    67
    Congratulated 31 Times in 2 Posts
    Quote Originally Posted by libidilatimmy View Post
    I'd be careful boiling antelope horns. You can ruin them, as in the sheaths fall apart, if not extremely carefully. I've always let the head, with no skin, rot with bag over horns, as stated previously. The sheaths will pop right off and boil the whole head. It does stink though so you need an iron gut for the process.
    I learned taxidermy from my dad when I was at a young age and have boiled countless heads with no problems. As long as you check them regularly the horns will come off long before they are in danger of falling apart. You don't have the bad smell to deal with and it also takes care of removing meat and the brains. You definitely don't want to put them to boil and walk away and leave them but you should have no problems if you keep checking them.

  3. #13
    Senior Member
    Join Date
    Aug 2011
    Location
    Littleton, CO
    Posts
    185
    Thanks
    115
    Thanked 59 Times in 43 Posts
    Congratulations
    67
    Congratulated 31 Times in 2 Posts
    Quote Originally Posted by tim View Post
    what tips do you have on removing the brain?
    Once you boil the head I like to use a piece of wire with a hook bent on the end. Twirl it around in the cavity and it will clean it out pretty well.

  4. #14
    Junior Member
    Join Date
    Feb 2014
    Location
    Clancy,MT
    Posts
    16
    Thanks
    2
    Thanked 0 Times in 0 Posts
    Congratulations
    9
    Congratulated 0 Times in 0 Posts
    I do few of these every year for family and friends, If you don't mind annoying your wife, The easy was is to get a dermestid beetle colonie and let them do the work. They do smell and you have to feed them year round but much easier than boiling. Before I put them in with the beetles a coat hanger with a couple of bends in it and chucked into a drill will "mix" the brains enough to shake most of it out.

  5. #15
    Senior Member
    Join Date
    May 2011
    Location
    North Umpqua, Oregon
    Posts
    2,507
    Thanks
    471
    Thanked 580 Times in 361 Posts
    Congratulations
    73
    Congratulated 99 Times in 11 Posts
    The last couple heads I have cleaned with "low temperature maceration". Basically a 5 gallon plastic pail (get from a hardware store) and a fish tank heater (warms water to about 90░). Put the fish tank heater in and put head in. Fill until the part you want cleaned is covered with water. Let sit for a few weeks, checking water levels occasionally. Bacteria develops in the water that eats away the flesh. This is SUPER stinky, but it does not deteriorate the bone/skull. The teeth normally fall out and need epoxied back in. Sometimes some of the nose bones need epoxied back in place too. Final result is a perfect skull though without bone deterioration.

  6. #16
    Senior Member
    Join Date
    May 2011
    Location
    North Umpqua, Oregon
    Posts
    2,507
    Thanks
    471
    Thanked 580 Times in 361 Posts
    Congratulations
    73
    Congratulated 99 Times in 11 Posts
    Quote Originally Posted by Colorado T View Post
    Once you boil the head I like to use a piece of wire with a hook bent on the end. Twirl it around in the cavity and it will clean it out pretty well.
    That's the way to do it. I use a coat hanger. I also sometimes make a sharply bent loop then form it into kind of a scoop like paddle.

    Someone needs to invent the "Brainerator" or "Brain-Be-Gone". Dang, you'd probably sell a dozen or two a year.

  7. #17
    Senior Member
    Join Date
    Jun 2011
    Location
    north idaho
    Posts
    422
    Thanks
    14
    Thanked 60 Times in 45 Posts
    Congratulations
    18
    Congratulated 33 Times in 5 Posts
    thanks for the replies on the brain, I have used a piece of wire and a drill, the video just made it sound way easier to remove brains than I have came across.
    I like the oxiclean tip.

  8. #18
    Senior Member
    Join Date
    Apr 2011
    Location
    Reno, NV
    Posts
    213
    Thanks
    67
    Thanked 27 Times in 26 Posts
    Congratulations
    42
    Congratulated 16 Times in 5 Posts
    I've removed the brain with a garden hose and nozzle. Just spray the water into the hole in the back and the brain comes shooting out.
    Can't spell scum without U&M... Go 'Cats!

  9. #19
    Senior Member
    Join Date
    Aug 2012
    Location
    Tennessee
    Posts
    408
    Thanks
    130
    Thanked 76 Times in 68 Posts
    Congratulations
    61
    Congratulated 31 Times in 9 Posts
    Sweet video and thanks for not recommending bleach as a whitening agent!

    For the brain, after the low temp boil take a screw driver or coat hanger to pull as much as you can out (mash the crap out of it if you have too). It will take a few heads to figure out how long to macerate before the brain tissue releases from the skull. Borax helps absorb the leftover tissue, plus it acts as a preservative as well.

    Kemsal 4 will help with degreasing and also help with the antelope skull odor, its almost impossible to rid the goat smell though.

    Only thing I would add to the already sweet video is to spray a clear coat matte finish on the skull, this will aid a bit in keeping the white color longer not to mention a few other minor things like odor and grease spotting.

  10. #20
    Senior Member
    Join Date
    Sep 2011
    Location
    Lewistown, MT
    Posts
    422
    Thanks
    38
    Thanked 136 Times in 78 Posts
    Congratulations
    29
    Congratulated 84 Times in 7 Posts


    So after spending to much money every year on mounts I decided to tackle my own European mounts this year, thanks a lot to this post. So I have done an initial boil, power washed most of it off, and am back doing a second boil to finish off the job. One question I have for all you seasoned DIY taxidermists, is how do you get the brain lining out? The pressure washer blasted all the brain material out like a champ, but now I see there is still the brain lining in there. Will this stink over time? Also, do I need to let the bone dry out before I apply the 40% peroxide paste? Thanks guys. Happy hunting, and boiling!!
    JJenness
    G
    &T Crazy

 

 

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •